Suction systems
For work that generates a lot of dirt, a suction system is a very helpful device that makes subsequent cleaning much easier for you. Whenever a large amount of dust and dirt accumulates, a high-quality suction system is an enormous facilitation of the cleaning of the workplace. The suction systems and industrial vacuum cleaners from Hemming Technik can significantly support you in your daily work and offer you enormous time savings in the long term.
SUCTION UNIT HE 3450 DS LONGOPAC
Suction unit
The suction unit has been specially developed for picking up large quantities of fine dust in the shortest possible time and has three individually switchable 1150-watt bypass suction motors in a robust metal housing. A vacuum indicator allows continuous monitoring of proper operation and possible filter clogging. A warning light indicates any filter problems.
Filter chamber
The large star filter dust class M with 3 m2 filter surface and an external filter shaking ensure a long service life. A vacuum manometer indicates the filter occupancy.
Emptying via Longopac system
Safe and dust-free disposal of the suction material via Longopac system (20m endless plastic bag). The vacuum cleaner is mounted on a robust steel frame with powder coating, non-marking rotating wheels and parking brake. It can be adjusted in height.
Technical data:
- Power 3450 watt
- Filter area 3m²
- Dimension 58 x 60 x 165cm
- Weight 70kg
- Voltage 230 Volt
- Max. Air quantity 540m³/h
- Dust category M
- IP44 Insulation
With these two special extraction systems, we have laid the foundation for absolutely dust-free work. The large filter surface of the special filter for fine dust (M filter) in conjunction with the large amount of air make this possible.
Item number: 19202
Designation: HE 3450 DS Longopac
CYCLONE PRE-FILTER HE 2300
Removing or moving large amounts of milling dust is not a simple operation. The solution is a powerful industrial vacuum cleaner, possibly in combination with a separator. This combination makes it possible to significantly increase the self-sufficiency of the vacuum cleaner and at the same time achieve greater efficiency in extracting, collecting and filtering the material.
Other advantages of the Pre-Filter are:
- provides higher protection for the motor of the industrial vacuum cleaner and significantly increases the service life
- the workload for the filters of the vacuum cleaner is reduced, so that the suction power always remains high and costs are reduced
- to meet the specific requirements of suction or collection
TECHNICAL DATA
- DN80 connections
- 2 x device connection piece DN50 for PUR screw socket
- Dimensions: 64 x 60 x 140 cm
- Weight: 16,5 kg
- High quality
- Filter chamber D500
- Emptying via Longopac system
Suction unit HE 3600 IC Longopac
The vacuum cleaner has been specially designed to pick up large quantities of fine dust in the shortest possible time and has three suction motors. The motor head consists of a robust plastic housing. An additional switch enables extraordinary filter cleaning. Filter chamber The patented filter system enables a constant suction power without interruption. Highest safety standard due to HEPA filter. Emptying via Longopac system Safe and dust-free disposal of the suction material via the Longopac system (22m endless plastic bag). The vacuum is mounted on a robust steel frame with powder coating, non-marking rotating wheels and parking brake.
TECHNICAL DATA
- Power 3600 watt
- Patented filter system
- Dimension 80 x 66 x 142 cm
- Weight 83 kg
- Voltage 230 Volt
- Max. Air quantity 510 m3/h
- HEPA filter
Why you should buy an industrial vacuum cleaner
Wherever sawing, sanding or planing takes place, dust and other dirt is generated in the workplace. This not only looks untidy, but at the same time can also be detrimental to health. Therefore, you should always have an industrial vacuum cleaner on site at your workplace to keep the room and the air clean at all times.
Dirt accumulates during many activities, but dust formation is particularly high during grinding and milling work. Therefore, here an extraction system would be ideal for the removal of the resulting dust. Also for the thorough cleaning of the floor surface after the Milling floor heating, a special extraction system is particularly helpful.
Industrial vacuum cleaners are generally equipped in such a way that you can easily move them even in smaller rooms. The dirt particles are usually caught with a filter bag or a filter cartridge, which is attached to the industrial vacuum cleaner, or is located inside. Essentially, you can get the devices in different designs that will surely meet your individual requirements.
Our personal test winner of the industrial vacuum cleaner
The products you will find in our range are our personal test winners of industrial vacuum cleaners. These include, for example, the HE 2300 DS industrial vacuum cleaner, which has a filter area of 3m² and thus belongs to dust class M. But also the industrial vacuum cleaner HE 3450 DS Longopac has it all and convinces not only with a long service life, but also with a dust-free and safe disposal of the dirt.
In addition, you will find a lot of other suction units, which all convince with their quality and workmanship.
If we have aroused your interest and you have become curious, please feel free to have a look at our homepage, or contact contact us by e-mail or phone.
